ATTENTION! The menu should be here - Either you don't have
Flash 8 plugin
ABS Speed Sensor
Air Flow Meter / Sensor
Air Intake Pressure Sensor
Alternator Current and Voltage
Carbon Canister Solenoid Valve
Coolant Temperature sensor
Diesel Glow Plugs
Digital ECM to Ignition Amplifier Signal
Electronic Fuel Pump
Exhaust Gas Recirculation
Idle Speed Control Valve
car comparision tool
4 wheel rolling road
copyright © 2009 Cathal Greaney.
Air Intake Pressure Sensor – BoschCRD Diagnostics.
The voltage will be proportionate to the boost pressure produced by the engines turbocharger.
The voltage at idle will be seen to rise as the pressure increases, reaching a maximum.
The sensor is connected into the inlet air supply and is of the conventional piezo-electric strain gauge variety.
The sensor will have three electrical connections of which:
Pin number 1 = voltage supply at 12 volts
Pin number 2 = earth circuit
Pin number 3 = variable output signal voltage
The pressure sensor will supply the ECM with a voltage that is proportionate to the pressure in the inlet manifold.